Core Sensors Releases CS-SM Steel and Rolling Mill Pressure Sensor
By Core Sensors | January 21, 2019
By Core Sensors | January 21, 2019
Core Sensors has released the CS-SM series pressure sensor designed to operate in the rugged and demanding environments of the steel and aluminum industry. The CS-SM steel and rolling mill pressure sensor is ideal for applications such as roll forming, stamping, pumps and coolant systems.
The CS-SM features a high strength sensing element machined from a single piece of stainless steel, eliminating the use of welds and O-rings that are potential weak points with long term use. A stainless steel body is welded to the sensing element and electrical connection to provide a IP69 rating capable of withstanding high pressure wash downs. 4X overpressure protection is standard on all configurations as well as a welded internal snubber to decrease the effects of pressure transients.
The CS-SM can operate from -40 to +100°C (-40 to 212°F) while providing a ≤ ± 0.25% BFSL accuracy. Optional ± 0.1% BFSL high accuracy is available upon request. Each sensor offers EMI/RFI protection and ~1 kHz frequency response (± 0.1% high accuracy models have 400 Hz frequency response).
Pressure ranges up to 350 bar are available with output signals of 4-20mA, 0-5V (3-wire) or 0-10V (3-wire) to address different application requirements. Electrical connection options include various lengths of cable or a 6-Pin Bendix MIL Spec connector. Pressure port options include 1/4″ MNPT, 7/16-20 UNF Male or 1/4″ Male BSPP.
Visit the CS-SM product page for a complete list of available options and specifications.
For more information or to request a quote, call us at (862) 245-2673 or email [email protected].
About Core Sensors:
Core Sensors designs, manufactures and distributes high quality sensors for measuring pressure and temperature properties for industrial and hazardous applications worldwide. Core offers solutions for industrial, submersible, differential and hazardous applications in both standard and custom packaging. In-house design and manufacturing capabilities along with strategic manufacturing partners allows Core to create solutions to some of the most complex sensor requirements.
A common concern is the performance of the transducer in various temperature conditions. Temperature is an important specification as it has a direct effect on the accuracy of the transducer. In this article we will discuss the different temperature specifications that are commonly found on our datasheets and how to interpret them.
One of the most important steps when specifying the most appropriate sensor for your application is selecting the wetted material of the process connection (or pressure port).Core Sensors offers a wide range of wetted materials to ensure the most adequate compatibility in your application.
Core Sensors has received ABS (American Bureau of Shipping) Type approval for a series of pressure transducers to be used in marine and offshore applications.
628 Route 10 West, Unit #8
Whippany, NJ 07981 USA
Phone: (862) 245-2673
Fax: (973) 585-7383
– Need a quote?
– Have a technical question?
– Don’t see what you need?
Fill out the form and a member of our sales team will contact you to discuss your requirements. You can also give us a call at (862) 245-2673.
– Need a quote?
– Have a technical question?
– Don’t see what you need?
Fill out the form and a member of our sales team will contact you to discuss your requirements. You can also give us a call at (862) 245-2673.