The CS54 wet/wet differential pressure transducer is a high strength sensor designed for differential pressure measurements of liquids and gases in hazardous areas. A 316L SS oil filled sensor element provides excellent stability over a wide operating temperature range while offering corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1/4″ MNPT or FNPT process connections.
Caution must be taken when installing and operating the CS54 in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation.
When viewing on a mobile device, swipe or press the arrow to view additional information
Performance @ 25°C
Accuracy*: ≤ ± 0.25% BFSL ≤ ± 0.5% BFSL (2 PSI & below) Stability (1 Year): ≤ ± 0.25% of FS Pressure Cycles: 4 million Max Line Pressure:** 500 PSI Overpressure:*** 2X or 500 PSI, whichever is less, rated differential pressure Burst Pressure:*** 3X rated differential pressure
* Accuracy includes non-linearity, hysteresis and non-repeatability ** Max line pressure is the highest equal common mode pressure that can be applied to the sensor without damage. *** Overpressure and burst pressure are the maximum differential pressure that can applied to the high side or low side before damage to the sensor will occur.
Operating Temperature: -40 to +80°C Operating Temperature: (Electrical connection “F”, DIN 43650-A) -20 to +80°C Media Temperature: -40 to +125°C Media Temperature: (Electrical connection “F”, DIN 43650-A) -40 to +105°C Compensated Temperature: 0 to +55°C Storage Temperature: -40 to +125°C TC Zero: ≤ ± 1% of FS ≤ ± 2% of FS (2 PSI & below) TC Span: ≤ ± 1% of FS ≤ ± 2% of FS (2 PSI & below)
EMI/RFI Protection: Yes IP Rating*: IP65 minimum Vibration: 10g, 20 to 5000Hz Shock: 100g, 11msec, 1/2 sine
* IP rating is dependent on electrical termination selected. Contact factory for more information * IP rating applies when electrical connector is attached with the appropriate ingress protection
Specifications are subject to change without notice
Click image to view larger
– Ordering Example: CS54-AA00010PD4H000-00 (1/4″ Female NPT, 316L SS, 0-10 PSI differential, 4-20mA, Turck® Mini-Fast®) – Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements. – Contact Core Sensors for configurations not shown.
Note that dimensions are for reference only. Please contact us if you do not see a dimension listed.