CSA Class I, Division 1, Groups A, B, C, D, T4 Approved
CS60
Explosion-Proof Pressure Transducer
Features
Great For…
**Disclaimer: Unless otherwise agreed in writing, Core Sensors products are not authorized for use in applications including medical devices, life support systems, in-flight aerospace, nuclear or any other application where the product failure could result in personal injury or death.
About the CS60
The CS60 Explosion-Proof Pressure Transducer is a high strength sensor designed for use in Class I, Division 1 explosion-proof locations. The CS60 features an all welded, factory sealed stainless steel construction, offering a minimum IP66 rating. A 1/2” Male NPT conduit fitting with 2 meters of 20AWG flying leads is standard, allowing for easy installation of rigid metal conduit. A wide operating temperature range and configurable design makes the CS60 a versatile pressure transducer that was engineered to operate in some the harshest conditions. Available output signals include 1-5V and 4-20mA loop powered. The CS60 is an excellent solution for applications such as well head pressure measurement, natural gas compressors and oil exploration.
Factory sealed stainless steel case, 1/2″ MNPT conduit fitting, 20AWG flying leads
Approvals/Certifications
Explosion-Proof
Dust Ignition-Proof
Specifications
Performance
Accuracy @ 25°C*
≤ ± 0.25% BFSL
≤ ± 0.5% BFSL (>10,000 PSI)
Stability (1 Year)
≤ ± 0.25% of FS
Pressure Cycles
100 million
Overpressure
2X minimum
Burst Pressure
5X or 60,000 PSI, whichever is less
* Accuracy includes non-linearity, hysteresis and non-repeatability
Thermal
Operating Temperature
-40 to +85°C
Media Temperature
-40 to +120°C
Compensated Temperature
-15 to +65°C
Storage Temperature
-40 to +125°C
TC Zero
≤ ± 1% of FS
≤ ± 2% of FS (500 PSI and below)
TC Span
≤ ± 1% of FS
≤ ± 2% of FS (500 PSI and below)
Environmental
EMI/RFI Protection
Yes
IP Rating
IP66
Vibration
10g, 20 to 2000Hz
Shock
100g, 11msec, 1/2 sine
Electrical (Current)
Outputs
4-20mA
Excitation
10-28VDC
Current Consumption
20mA, typical
Output Load
0-800 Ohms @ 10-28VDC
Frequency Response (min)
~250Hz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Electrical (Voltage)
Outputs
1-5V
Excitation
10-28VDC
Current Consumption
<10mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Specifications are subject to change without notice
Model Number Configuration
Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements.
Contact Core Sensors for configurations not shown.
– Ordering Example: CS60-T01A00500PS1R000-02 (No temp, 1/2” Male NPT, 316L SS, 0-500 PSI sealed gauge, 1-5V, 1/2” MNPT conduit fitting with flying leads, 2 meter flying leads)
Note: Mobile users can use the zoom feature to view the model number configuration matrix clearly.
Dimensions
Note that dimensions are for reference only. Please contact us if you do not see a dimension listed.
Note: Mobile users can use the zoom feature to view the dimensions clearly.
Connect With Our Sales Team
Have questions? Need a quote? We are ready to help! Fill out the form and a member of our sales team will contact you to discuss your requirements. You can also give us a call at (862) 245-2673.
Follow Us
