The CS80 pressure transducer is a high strength sensor designed for use in intrinsically safe areas. The CS80 features an all welded stainless steel construction for a minimum IP65 rating. A wide range of configurable options make the CS80 a versatile pressure transducer that can be designed to operate in some the harshest conditions. Low power outputs are available which can operate off of 3-5VDC of unregulated power to extend battery life in remote applications. The CS80 is an excellent solution for applications such as natural gas compression and oil exploration.
Caution must be taken when installing and operating the CS80 in known Class I, Division 1 hazardous locations. Please review the Intrinsically Safe Operating Instructions prior to installation.
When viewing on a mobile device, swipe or press the arrow to view additional information
Performance @ 25°C
Accuracy*: ≤ ± 0.25% BFSL ≤ ± 0.5% BFSL (>10,000 PSI) Stability (1 Year): ≤ ± 0.25% of FS Pressure Cycles: 100 million Overpressure: 2X minimum Burst Pressure: 5X or 60,000 PSI, whichever is less
* Accuracy includes non-linearity, hysteresis and non-repeatability
Operating Temperature: -40 to +80°C Operating Temperature: (Electrical connection “F”, DIN 43650-A) -20 to +80°C Media Temperature: -40 to +125°C Media Temperature: (Electrical connection “F”, DIN 43650-A) -40 to +105°C Compensated Temperature: 0 to +55°C Storage Temperature: -40 to +125°C TC Zero: ≤ ± 1% of FS TC Span: ≤ ± 1% of FS
EMI/RFI Protection: Yes IP Rating*: IP65 minimum Vibration: 10g, 20 to 2000Hz Shock: 100g, 11msec, 1/2 sine
* IP rating is dependent on electrical termination selected. Contact factory for more information * IP rating applies when electrical connector is attached with the appropriate ingress protection
Specifications are subject to change without notice
Click image to view larger
– Ordering Example: CS80-1A00200PG4A000-00 (1/2″ Male NPT, 316L SS, 0-200 PSI gauge, 4-20mA, M12x1) – Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements. – Contact Core Sensors for configurations not shown.
Note that dimensions are for reference only. Please contact us if you do not see a dimension listed.