You are here: Home1 > Products2 > Submersible Pressure Transducers3 > CS12 Submersible Pressure Transducer
Pressures from 1 PSI up to 100 PSI
Submersible Pressure Transducer
**Disclaimer: Unless otherwise agreed in writing, Core Sensors products are not authorized for use in applications including medical devices, life support systems, in-flight aerospace, nuclear or any other application where the product failure could result in personal injury or death.
The CS12 Submersible Pressure Transducer is designed for liquid level measurement applications. Stainless steel (316L and 304) construction and an ETFE cable jacket allows for installation in a wide variety of liquids. Precision tig welds and a high strength Nylon cable gland prevent liquids from entering the transducer. A wide diameter vent tube quickly equalizes the barometric pressure within the sensor body to ensure accurate level measurements. The CS12 is available in various output signals including 4-20mA loop powered for long distance transmissions and voltage outputs for low power, low current consumption.
While a nose cone comes standard on the CS12 Submersible Pressure Transducer, configurations are available with 1/4″ or 1/2″ Male NPT for threaded installation in flood prone locations.
Low power configurations are available when utilizing the CS12 in remote locations or where supply voltage is limited. Ask Core Sensors for more information!
Standard and custom cable lengths are available to simplify installation.
Customizable design
The CS12 Submersible Pressure Transducer is the ideal solution for continuous liquid level measurement. This transducer was engineered with a high strength 300 series stainless steel (304 & 316L) metallic construction, corrosion resistant ETFE cable jacket, and a Nylon strain relief for compatibility in a wide range of liquids.
The CS12 features a configurable design, allowing Core Sensors to tailor the transducer to your applications operating requirements. Have a limited voltage supply at your installation? No problem! The CS12 is offered in a low power configuration, capable of operating from an unregulated power supply of 3-5VDC and consuming 3mA or less of current. Need an extra long cable length? No problem! Core Sensors offers both standard and custom cable lengths, ensuring you have enough cable to simplify your installation.
The CS12 Submersible Pressure Transducer is also great for non-submersible applications where flooding is a concern. While 100 PSI is the max rated submersion, the CS12 can be configured with pressure ranges above 100 PSI for non-submersible applications, ensuring continuous pressure measurement even during flooding events.
Accuracy @ 25°C*
≤ ± 0.25% BFSL
≤ ± 0.5% BFSL (2 PSI & below)
Stability (1 Year)
≤ ± 0.25% of FS
Pressure Cycles
50 million
Overpressure
2X minimum
Burst Pressure
5X or 500 PSI, whichever is less
Max Submersion
100 PSI
* Accuracy includes non-linearity, hysteresis and non-repeatability
Operating Temperature
-40 to +85°C
Compensated Temperature
0 to +55°C
Storage Temperature
-40 to +125°C
TC Zero
≤ ± 1% of FS
≤ ± 2% of FS (2 PSI & below)
TC Span
≤ ± 1% of FS
≤ ± 2% of FS (2 PSI & below)
EMI/RFI Protection
Yes
IP Rating
IP68
Vibration
10g, 20 to 2000Hz
Shock
100g, 11msec, 1/2 sine
Weight, excluding cable (approx.)
0.50 lb.
Wetted Material
See Dimensions/Materials listing
Cable Conductors
22 AWG
Cable Pull Strength
150 lb.
Outputs
4-20mA
Excitation
10-28VDC
Current Consumption
20mA, typical
Output Load
0-800 Ohms @ 10-28VDC
Frequency Response (min)
~250Hz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
1-5V
Excitation
10-28VDC
Current Consumption
<10mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
0.5-4.5V ratiometric
Excitation
5VDC +/- 0.5V
Current Consumption
<10mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
0.5-2.5V non-ratiometric
Excitation
3-5VDC unregulated
Current Consumption
≤ 3mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Specifications are subject to change without notice
Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements.
Contact Core Sensors for configurations not shown.
– Ordering Example: CS12-6A00005PG4Z000-10 (Nose cone, 316L SS, 0-5 PSI gauge, 4-20mA, 1/2″ MNPT conduit with nylon strain relief, 10 meters of ETFE cable)
Note: Mobile users can use the zoom feature to view the model number configuration matrix clearly.
Note that dimensions are for reference only. Please contact us if you do not see a dimension listed.
Note: Mobile users can use the zoom feature to view the dimensions clearly.
Note: Mobile users can use the zoom feature to view the materials clearly.
Have questions? Need a quote? We are ready to help! Fill out the form and a member of our sales team will contact you to discuss your requirements. You can also give us a call at (862) 245-2673.